Automatic scrap car hydraulic press scrap metal baler

1. Introduction
The Metal Baler is used to cold compress the waste metal with 2~5mm thickness into blocks under normal condition,to facilitate transportation or discharge into furnace. 
2. Structure and principle of Hydraulic Metal Baler
Side cylinder is equipped with a quick-action device that improves the operation efficiency greatly.
Type of bale out choose turn-out or forward-out or push-out.
Hydraulic system of Metal Baler Machine is devided into high and low pressure control,safe and reliable.
Manual operation is safe,reliable and simple.

3. Main technical parameter

Model	YD-630A	YD-1000A
Normal (KN)	630	1000
Material box size (LxWxH)(mm)	1000x600x500	1000x600x500
Bale size (LxW)(mm)	180 ×180	200 ×200
Production (Ton/hour)	0.8~1	0.9~1.1
Power (Kw)	7.5	11
Type of baler out	Turn-out	Turn-out
Operation	Manual operation	Manual operation
Bale weight(Kg)	30~40	40~50

4. End product of Scrap Metal Baler

5. FAQ
What is your minimum order quantity, can you send me samples?
Our minimum quantity is 1 set, as our product is machinery equipment, it’s difficult to send you samples, however,we can send you catalog, warmly welcome you to come visit our company.
About the after-sale service, how can you solve the problems occurred of your overseas customer in time?
The warranty of our machine is normally 12 months, during this period, we will arrange the international express immediately, to make sure the replace parts to be delivered as soon as possible.